Back to Blog
Industry News 2026-11-15 Robot Kits & Laser Cutters for STEAM Education 0 views

High School Intern Workshop at Haystack: A Planning Model

High School Intern Workshop at Haystack: A Planning Model

Use the Haystack School intern session as a model for planning a high school intern workshop: pick one tool, one takeaway, and a real audience for the work.

What the Haystack session actually did

Haystack's high school interns tested out the xTool S1 Laser Cutter and Screen Printer, pulling prints on t-shirts with a logo of their own design cut out of laser-engravable screen printing material. That single sentence is a useful planning model, because it packs in the decisions that make or break a student workshop: a named machine, a named output, and a design the students owned.

If you are building a school internship program around making, the lesson is not to copy the equipment list. It is to copy the compression. One tool, one finished object, one design decision made by the intern. Everything else in your plan should serve that triangle.

The session details worth borrowing

  • [Workshop] High School Interns Workshop in Haystack School: Interns tested the xTool S1 Laser Cutter and Screen Printer, pulling prints on t-shirts with a logo of their own design. Two tools in one session only works when the handoff is obvious: the laser cuts the screen, then the screen makes the print. Plan the transfer step before you plan anything else.
    [Workshop] High School Interns Workshop in Haystack School
    [Workshop] High School Interns Workshop in Haystack School
  • [Workshop] High School Interns Workshop in Haystack School: The logo was cut out of laser-engravable screen printing material. The material choice is what links the two machines. When you scope a makerspace intern workshop, name the consumable that carries the work from one station to the next.

Student workshop planning steps that follow from this model

Treat these as the sequence the Haystack session implies, not as a manufacturer procedure. The supplied record does not include operating instructions, settings, or safety guidance for the xTool S1, so confirm those with your own equipment documentation and trained staff before students touch a machine.

  1. Name the takeaway object first: The interns left with a printed t-shirt. Decide what your interns physically carry out of the room, then work backwards to the tools it requires.
  2. Give the design work to the interns: The logo was their own design. Reserve a real block of time for design and review, and keep staff hands off the creative decisions.
  3. Choose one transferable material: Laser-engravable screen printing material is what made the laser-to-print workflow possible. Pick your equivalent early so ordering and testing are not a last-minute scramble.
  4. Assign a station owner per machine: A two-machine session needs someone accountable for each station and someone accountable for the handoff between them.
  5. Plan the reveal: Pulling the print is the moment interns remember. Build the schedule so the last step happens with time to spare, not in the final five minutes.

Where this model fits in a school internship program

A short, high-contrast session like this one works best as an introduction or a capstone demo, not as the whole internship. It gives interns a complete loop — design, cut, print, keep — in a single sitting, which is unusually motivating for high schoolers who have never used a makerspace.

It also gives you an honest test of fit. If interns lose interest during the design phase, a longer making program will not fix that. If they light up at the print pull, you have evidence that a deeper makerspace track is worth funding.

For a makerspace intern workshop with more than a handful of students, run the design phase in a separate room or a separate session so the machines are never the bottleneck. The Haystack record describes one intern group and one workflow; it does not describe throughput, so size your cohort against your own supervision capacity rather than against this example.

Questions to settle before you commit the schedule

  • Who supervises the laser station?: The supplied information does not include safety or supervision requirements for the xTool S1. Settle this with your own risk assessment and trained staff before scheduling students.
  • How many interns per machine?: The record shows a group session but gives no ratio. Set your own limit based on sightlines and how much hands-on time each intern needs.
  • What happens to the shirts?: Interns keep them. Budget the blanks as a program cost, not an optional extra.
  • What is the fallback if a station fails?: With two dependent machines, a fault at either end stops the print. Have a design-review activity ready so the session still has value.

What the Haystack listing leaves open

The supplied record is a short event description, not a curriculum. It does not state session length, group size, machine settings, material specifications, safety protocols, or cost per student. The catalog price shown for this listing is a store price, not a per-intern program budget, so do not use it to cost out your own workshop.

That is fine for planning purposes. The value of the Haystack example is the shape of the session, and the shape is clear: one design, two tools, one wearable result. Fill in the operational details from your own equipment documentation and your school's supervision rules, and you have a workshop model you can defend to a principal, a parent, or a grant committee.

Related Articles

Customer Service
Home
Products
Cart
Profile